Buy - Iron Square Billets

RFQ Details

Product Name: High tension Square billets 1. Dimensions and tolerances: Size in mm Tolerance of the cross sectional area in mm Tolerance of the Length in mm Diagonal difference (out of square) in mm max. Radius of the corner max.in mm Permissible out of truth on the length of 1m in mm 100x100x5750 ± 2,4 +50 - 150 3,3 15 10 2. Shape: Longitudinal twisting, Bellying and lopsidedness are inadmissible. 3. Surface Condition: Billets must be free from harmful defects such as cracks, Laminations and roughness fines, jagged surface, Flaws, teeming laps, seal shells and slivers. 4. End cut: Type of end â€Â“cut is up to the producer, however ends of the billet should be free from any deformation (e.g. curving out of square), remains of shrinkage cavity as well as free from slashes in case of hot â€Â“ saw cutting. 5. Packing and marking: Billets should be supplied in bundles of about 2 to 4 MT per bundle and should be securely tied at three places with suitable wire or rope .A label on each bundle should be bonded showing the number of cast, grade and name of the producer or supplier. 6. Chemical Composition and mechanical properties: Suitable for producing weldable height strength ribbed reinforced steel bars according to: Chemical composition C% 0.28- 0.34 Mn% 0.90 - 1.3 Si% 0.25 - 0. 40 S-P% 0.045Max Mechanical Properties are: Tensile Strength (min) 520N/Sq.mm Yield Point (min) 400N/sq.mm Elongation (min) 14% Should be achieved and secured after rolling the billets in the mill. 7. Quantity: 100x100x5750mm: 10,000tons 8. Destination Port: Lattakia, Syria. 9. Terms of payment: L/C after received proof of product, including SGS reports. 10. Performance Bond: 2%